Genuine Starlink Mini DC Power Cable 49 ft (15 m) — OEM Replacement
Genuine Starlink Mini DC Power Cable 49 ft (15 m) — OEM Replacement
The Starlink Mini DC power cable is the genuine 15 metre (49 foot) cable that carries DC power from the Starlink Mini power supply to the dish. It is the same cable supplied in the Starlink Mini kit, with a UV- and weather-resistant outer jacket rated to 600 V and 90 °C, and it is the only cable required between the power supply and the Mini.
Which Starlink hardware does this cable fit?
| Starlink hardware | Compatible | Notes |
|---|---|---|
| Starlink Mini | Yes | Direct OEM replacement |
| Starlink Mini power supply (UTP-231L) | Yes | This is the cable that joins the two |
| Standard (Gen 3) dish | No | Uses a different dish cable and connector |
| Standard Actuated (Gen 2) dish | No | Different cable system |
This is the power cable, not an Ethernet cable. A wired network connection to the Mini uses a separate RJ45 cable.
Specifications
| Length | 15 m (49 ft) |
| Function | DC power, power supply to Starlink Mini dish |
| Jacket rating | 600 V, 90 °C |
| Safety listing | UL file E184936, CL3R rated |
| Jacket | Flexible, UV- and weather-resistant |
| Supplied | Factory-coiled with two hook-and-loop straps |
| Condition | New, genuine OEM |
Why buy this cable
- Genuine OEM cable — the same 15 m DC cable supplied in the Starlink Mini kit, not a third-party substitute.
- 49 ft (15 m) of reach — enough to place the Mini on a roof, mast or pole while the power supply stays indoors.
- Rated 600 V, 90 °C, UL listed — CL3R-rated jacket under UL file E184936.
- Weather- and UV-resistant jacket — built for permanent outdoor runs.
- Power only, no data loss — length affects nothing about your connection speed.
- Free StarMax cable caddy — 3D-printed winder with carry handle, four mounting holes and a connector cap.
- Factory-coiled with straps — arrives tidy, stores tidy.
- Ships in 24 hours with tracking, 30-day returns.
When do you need a replacement DC cable?
Replace or add a DC power cable if the Mini loses power intermittently when the cable is moved; the jacket is cut, crushed or chewed; a connector end is corroded or bent; you need a spare for a second site; or you want a dedicated cable for a vehicle or boat so the home run stays in place.
What is included
Included: 1 × genuine Starlink Mini DC power cable, 15 m (49 ft). 1 × StarMax 3D-printed cable caddy with orange connector cap — a free bonus, designed and printed by StarMax as an aftermarket accessory, not a SpaceX product.
Not included: Starlink Mini dish. Starlink Mini power supply. RJ45 Ethernet cable.
Frequently asked questions
Is this the power cable or the network cable?
The power cable. It carries DC power from the Starlink Mini power supply to the dish. Ethernet is a separate cable.
Can I run it outdoors or bury it?
The jacket is UV- and weather-resistant and rated to 600 V and 90 °C, so surface outdoor runs are fine. It is not rated for direct burial — use conduit if the run goes underground.
Will a longer cable slow the connection down?
No. This carries DC power, not data, so length affects voltage drop rather than speed. At 15 m the supplied cable is already matched to the Mini's power budget.
Is this the same cable that came with my Starlink Mini kit?
Yes. It is the genuine OEM cable, not a third-party substitute.
What is the free cable caddy?
A StarMax-designed winder printed in-house. It has a carry handle, four mounting holes so it can be fixed to a van wall or locker, and an orange cap that protects the connector while stored. Free with every order.
Can I use this cable with a Gen 3 Standard dish?
No. The Standard dish uses an entirely different cable and connector system.
StarMax is an independent retailer of genuine Starlink® accessories. Not affiliated with, endorsed by, or sponsored by SpaceX or Starlink. Starlink® is a trademark of Space Exploration Technologies Corp.